DSC+DW集群的守护进程是否会自动拉起实例

1、部署简介
部署为两节点DMDSC+DW集群

网络规划
DSC集群IP：192.168.157.144，192.168.157.145
备库IP：192.168.157.146

使用脚本自动化部署。

执行以下脚本：
./DMShellInstall -di dm8_20251208_x86_CentOS7_64.iso -iso N -d /home/dmdba/dmdbms -rp 123456 -hn dsc -dpi 192.168.157.144,192.168.157.145 -dmi 192.168.157.144,192.168.157.145 -ddn DMDSC -den DMDSC -fmd N -dcd /dev/sdc -vod /dev/sdd -lod /dev/sdf -ard /dev/sde -dad /dev/sdb

手动配置一个实时备库：

DSC+DW:
集群状态（dmwatcher）：

集群状态（dmcssm）：

当前dmdcr.ini配置。
DSC01：

DMDCR_PATH = /dev/asmdisk/dmdcr01
DMDCR_MAL_PATH = /dmdata/DMDSC/dmasvrmal.ini
DMDCR_SEQNO = 0
DMDCR_ASM_RESTART_INTERVAL = 180
DMDCR_ASM_STARTUP_CMD = /home/dmdba/dmdbms/bin/DmASMSvrServiceAsmsvr start
DMDCR_DB_RESTART_INTERVAL = 360
DMDCR_DB_STARTUP_CMD = /home/dmdba/dmdbms/bin/DmServiceDMDSC start mount
DMDCR_AUTO_OPEN_CHECK = 111
DMDCR_ASM_TRACE_LEVEL = 2

DSC02：

DMDCR_PATH = /dev/asmdisk/dmdcr01
DMDCR_MAL_PATH = /dmdata/DMDSC/dmasvrmal.ini
DMDCR_SEQNO = 1
DMDCR_ASM_RESTART_INTERVAL = 180
DMDCR_ASM_STARTUP_CMD = /home/dmdba/dmdbms/bin/DmASMSvrServiceAsmsvr start
DMDCR_DB_RESTART_INTERVAL = 360
DMDCR_DB_STARTUP_CMD = /home/dmdba/dmdbms/bin/DmServiceDMDSC start mount
DMDCR_AUTO_OPEN_CHECK = 111 //配置为自动拉起
DMDCR_ASM_TRACE_LEVEL = 2

当前dmwatcher.ini配置
DSC01：
[GRP1]
DW_TYPE = GLOBAL
DW_MODE = MANUAL
DW_ERROR_TIME = 60
INST_RECOVER_TIME = 60
INST_ERROR_TIME = 35
INST_INI = /dmdata/DMDSC/dmdsc01_config/dm.ini
DCR_INI = /dmdata/DMDSC/dmdcr.ini
INST_OGUID = 63635
INST_STARTUP_CMD = /home/dmdba/dmdbms/bin/dmserver
INST_AUTO_RESTART = 0 //未开启自动拉起

DSC02：
[GRP1]
DW_TYPE = GLOBAL
DW_MODE = MANUAL
DW_ERROR_TIME = 60
INST_RECOVER_TIME = 60
INST_ERROR_TIME = 35
INST_INI = /dmdata/DMDSC/dmdsc02_config/dm.ini
DCR_INI = /dmdata/DMDSC/dmdcr.ini
INST_OGUID = 63635
INST_STARTUP_CMD = /home/dmdba/dmdbms/bin/dmserver
INST_AUTO_RESTART = 0 //同样未开启

此时，关闭守护进程，实例，asm，css。然后只启动css服务：